Compact design fits in a pocket so you can carry it anywhere.
1 tube of glue, 1 piece of sandpaper, 4 round patches and 2 rectangular patches.
CYCLING BMX RUNNING URBAN CYCLING HYBRID BIKES MOUNTAIN BIKES BMX STREET ROAD RACING GRAVEL CYCLING INTERMODAL CYCLING LONG DISTANCE URBAN CYCLING URBAN SPEED CYCLING TRADITIONAL URBAN CYCLING HYBRID CYCLING CROSS COUNTRY MTB ALL MOUNTAIN MTB SPORT TRAIL MTB
1/ Locate the hole on the inner tube. 2/ Rub the surface where the patch will be applied using the sandpaper. 3/ Degrease, clean and dry the surface. 4/ Spread the glue evenly around the hole. 5/ Wait around 1 minute until the glue turns dull. 6/ Place the patch over the centre of the hole (without touching the glue and grippy surface the patch with your fingers) and press hard for at least 1 minute. 7/ Do not remove the patch's transparent film.
Check that no objects are lodged in the tyre before putting the inner tube back in place.
Keep in a dry place away from heat sources.
Tested and approved by a panel of 20 young cyclists. 100% effective when the repair is performed correctly (watch our video before repairing your tyre).
DANGER! Liquid and vapour is highly flammable.. Irritates the skin. May cause drowsiness or dizziness. Very harmful to aquatic organisms; can cause long-term adverse effects.