Need to keep your drinks hot or cold for several hours? Our designers have developed this solid, highly insulating bottle. Simple, solid and very insulating, the reliable top opens in a quarter turn, cup included / 1 litre.
Start at 95°: 82°C after 6h, 73° after 12h, 60° after 24h.
Ease of use
Enables you to pour by partly unscrewing the top. Cup included. Stainless.
Easy to clean thanks to the unscrewable top. Stainless steel inside.
Double wall stainless 18/8 (304) design with vacuum between the two walls.
HIKING TREKKING HIKING TREKKING SEVERAL DAYS FAST HIKING SNOW HIKING NATURE HIKING MOUNTAIN HIKING BACKPACKING DESERT TREKKING TROPICAL TREKKING ARCTIC TREKKING MOUNTAIN TREKKING
COOK /DRINK/ EAT
LEVEL OF PRACTICE
Advice to optimise the performance of your insulated bottle.
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle. the fuller the bottle, the better it is at keeping its contents hot or cold.
By partially unscrewing the cap, you can pour the liquid easily, avoiding fully opening the cap which would reduce the isothermal performance. The included cup is screwed onto the bottle for easy transport.
Wash by hand then rinse with clear water and leave to dry with the cap open. The bottle can be put in the dishwasher, but do not put the stopper or cup in.
First time use
Rinse the entire product 3 times with clean water before using it for the first time.
Materials and regulations
Our products and materials meet food contact norms and standards currently in force. They do not contain Bisphenol A (BPA), in compliance with French regulations in force.
Weight and dimensions
Volume: 1 litre Size: Ø 9 cm x 30 cm Weight: 630 grams Available in: 0.4 L/0.7 L/1 L/1.5 L
Wash and dry before storing. Store in a clean and dry place.
Our isothermal products are tested using the same protocol: Water at 95°C is placed in the product, which is then closed. We then measure the temperature drop of the water after 6, 12 and 24 hours.
Bottle/Body : 100.0% Stainless Steel 304 Cap : 75.0% Polypropylene, Cap : 25.0% Stainless Steel Joint/Gasket : 100.0% Silicon
There are no technical information to display. Please try again later.