Need to keep your drinks hot or cold for several hours? Our designers have developed this solid, highly insulating bottle. Simple, solid and very insulating, the reliable top opens in a quarter turn, cup included / 1 litre.
Dble wall stainless steel 18/8 (304) design with a vacuum between the two walls.
Start at 95°: 82°C after 6h, 73° after 12h, 60° after 24h.
Ease of use
Enables you to pour by partly unscrewing the top. Cup included. Stainless.
Easy to clean thanks to the unscrewable top. Stainless steel inside.
Advice to optimise the performance of your isothermal bottle.
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle. the fuller the bottle, the better it is at keeping its contents hot or cold.
Rinse the entire product 3 times with clean water before first use.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
By partially unscrewing the cap, you can pour the liquid easily, avoiding fully opening the cap which would reduce the isothermal performance. The included cup is screwed onto the bottle for easy transport.
Wash by hand then rinse with clear water and leave to dry with the cap open. The bottle can be put in the dishwasher, but do not put the stopper or cup in.
Weight and dimensions
Volume: 1 litre Size: Ø 9 cm x 30 cm Weight: 630 grams Available in: 0.4 L/0.7 L/1 L/1.5 L
Wash and dry before storing. Store in a clean, dry place.
Our isothermal products are tested according to the same protocol: Water at 95°C is placed in the product which is then closed. The drop in temperature of the water is then measured after 6, 12 and 24 hours.
No alcohol. Do not put in the freezer or microwave.
Need to keep your drinks hot or cold for several hours? Our designers have developed this solid, highly insulating bottle.
Product plus point
The advantage: Cup included. 1 L.
Simple, solid and very insulating, the reliable top opens in a quarter turn, cup included / 1 litre.
Bottle/Body: 100.0% Stainless Steel 304
Cap: 25.0% Stainless Steel, 75.0% Polypropylene
Joint/Gasket: 100.0% Silicon
There are no technical information to display. Please try again later.