Need to keep your drinks hot or cold for several hours? Our designers have developed this solid, highly insulating bottle. Strong, simple and highly insulating, the reliable lid opens with a quarter turn, cup included / 0.7 litre.
Starting temperature 95°C: 81°C after 6 hrs, 70° after 12 hrs, 55° after 24 hrs.
Ease of use
Enables you to pour by partly unscrewing the top. Cup included. Stainless.
Easy to clean thanks to the unscrewable top. Stainless steel inside.
Dble wall stainless steel 18/8 (304) design with a vacuum between the two walls.
HIKING TREKKING HIKING TREKKING SEVERAL DAYS FAST HIKING MOUNTAIN HIKING NATURE HIKING SNOW HIKING BACKPACKING MOUNTAIN TREKKING DESERT TREKKING ARCTIC TREKKING TROPICAL TREKKING
COOK /DRINK/ EAT
LEVEL OF PRACTICE
Advice to optimise the performance of your isothermal bottle.
Fill the bottle with boiling water for 5 minutes. Then replace the water with your beverage. Close the bottle. the fuller the bottle, the better it is at keeping its contents hot or cold.
By partially unscrewing the cap, you can pour the liquid easily, avoiding fully opening the cap which would reduce the isothermal performance. The included cup is screwed onto the bottle for easy transport.
Wash by hand then rinse with clear water and leave to dry with the cap open. The bottle can be put in the dishwasher, but do not put the stopper or cup in.
Rinse the entire product 3 times with clean water before first use.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force.
Weight and dimensions
Volume: 0.7 litre Measures: Ø 8.3 cm x 26.4 cm Weight: 450 grams Available in: 0.4 L/0.7 L/1 L/1.5 L
Wash and dry before storing. Store in a clean, dry place.
Our isothermal products are tested according to the same protocol: Water at 95°C is placed in the product which is then closed. The drop in temperature of the water is then measured after 6, 12 and 24 hours.
Bottle/Body : 100.0% Stainless Steel 304 Cap : 75.0% Polypropylene, Cap : 25.0% Stainless Steel Joint/Gasket : 100.0% Silicon
There are no technical information to display. Please try again later.