Created and tested in the French Alps, this long-sleeved poncho provides shelter from the rain when hiking. This waterproof rain cape is the essential accessory for your hikes. It is quick to get on and provides full protection from the rain, with or without a backpack (maximum capacity of 40 L).
Coating: 2000 mm rating (Schmerber) Fully taped seams. Long sleeves
Hydrophilic coating (RET=12): reduces condensation in the clothing.
Deep zipped air vent to allow fresh air inside during physical exercise.
Can accommodate a 0-40L backpack inside.
Polyester fabric with good resistance to tearing.
Independent storage bag provided. Dimensions: L18 x H20 x D3
From 250 g (XS) to 340 g (L/XL) to save weight in the bottom of your bag.
2 openings for easy access to the jacket or trouser pockets.
HIKING TREKKING HIKING TREKKING SEVERAL DAYS FAST HIKING MOUNTAIN HIKING NATURE HIKING SNOW HIKING MOUNTAIN TREKKING TROPICAL TREKKING BACKPACKING
A SOURCE OF
Fit and sizing information
Good coverage for hikers between 156 and 166 cm in height (size XS) between 167 and 176 cm in height (size S/M) between 177 and 190 cm in size L/XL ... and wearing a backpack (capacity of 0 to 40 L). The hood can be tightened using an elasticated cord and a stopper. The ends of the sleeves are cuffed with an elasticated bias binding that prevents water from entering the sleeves. This rain cape is easy to get on and off thanks to its very long front zip, by easily letting the head through
Additional recommended products
To complement your outfit, a pair of waterproof trousers or gaiters is recommended to protect your lower legs perfectly.
We measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. Components with a 2000 mm rating can withstand the pressure of a 2000 mm column of water (which is equivalent to a rain shower lasting 2 hours).
Waterproofing of the garment
This garment has been shower-tested in 60 litres/sqm/hour of water for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the resistance, the more water vapour generated by the body in physical activity can escape through the fabric. Hence, the more breathable it is. For example: RET < 9 = extremely breathable fabric 9 < RET < 12 = very breathable fabric 12 < RET < 20 = breathable fabric RET > 20 = little or no breathability. This cape has an RET = 12.
Water repellent property of the component
The water repellent property of a fabric is its ability to make water run off its surface without absorbing it. In this way, the fabric does not soak up water and therefore remains lightweight, breathable and warm. The water repellent property is obtained by applying a treatment to the outer surface of the fabric. This treatment needs to be restored throughout the lifetime of the garment (every 3 washes). All of Quechua's ponchos and capes have a water repellent treatment.
A score for comparing the products' environmental impact
The product's environmental footprint is calculated over its entire lifespan using various indicators. An overall score from A to E is given to help you easily identify the most eco-friendly products by comparing products of the same type (T-shirts, trousers, backpacks, etc.) with each other. Decathlon is committed to displaying the environmental information of its products. For more information: http://sustainability.decathlon.com/
Use a waterproof spray or wash-in product To restore the water repellent property of the fabric and optimise the performance of your garment throughout its lifetime.
Long-term storage: dry thoroughly and fold in its bag.