End Zone 700 Men's Snowboarding Boots - Black

    Write a review
    There are not enough products in stock
    S$ 160.00
    Designed for Expert level female snowboarders seeking excellent support and cushioning. Perfect for all types of terrain, ideal for Freestyle.
    The End Zone 700 is a perfect and complete snowboarding boot : level 3 liner with excellent support, powerful Fast blocking tightening system, medium flex.
    Size Size guide
    • 27.5cm
    Write a review

    Check the stock availability in our stores

    Sport Benefits
    User comfortFirm foam providing a good combination of comfort and support
    Easy opening / closingFast Blocking: 1-step system for maximum tightening force at the top & bottom
    Fit3-point liner lacing system + Weblock + 13 mm ergonomic ankle foam padding
    RigidityMedium Flex for good Freestyle/On-piste/Off-piste versatility.
    Thermal insulationEVA (80% air) midsole protects against cold from ground
    TractionJump sole: in rubber + high-density lugs for grip
    CushioningJUMP sole: EVA midsole for cushioning and low weight
    Warranty2 Years
    Technical Information

    A word from the product manager
    It has all the qualities of a top of the range model: a lightweight and shock absorbent sole, a quick and powerful tightening system, a soft flex suited to Freestyle use, which is also very versatile with excellent heel support, helping the rider to steer the board at high speed, an articulated upper which prolongs the life of the flex, etc. But this would be nothing without the unashamed Freestyle looks that our designer gave to this model. As you might have guessed, I love the boot.
    Comfort is very important in snowboarding. To limit the compression points, we have: _ designed the tongue of the liner so that it avoids the ankle bone _ added the second layer of foam at the instep/shin fold to prevent the laces from restricting the blood flow, _ chose a soft foam _ added a very soft material to the shin area, where there is often no more sock fabric! _ chose an EVA that is lightweight and provides cushioning and insulation.
    Easy to get the boot on and off
    But comfort also comes from getting the boot on/off: we have always given our boots a wide opening to make them easy to get on/off as well as straps on the tongue of the liner and the shoe to facilitate opening.a third strap at the rear of the liner can be used for carrying as well as easily removing the liner for drying thoroughly.
    FAST BLOCKING tightening system
    This tightening is: _ Very powerful: when you pull the handle, you apply maximum force to 2 small areas: one lace strand for the top section, one lace strand for the lower section. _ Very quick: block them by pulling upwards. _ Very reliable: when riding, the more pressure you apply to the laces, the tighter they lock into the locking cleat _ Very easy to loosen: just hold the laces at a 90° angle and they easily come out of the cleats
    Boot flex / stiffness
    Flex/rigidity of the boot The key feature of the End Zone is its Medium Flex combined with superior support (SUPPORT FOAM ankle foam, 3-point lacing system + WEBLOCK, mechanical link between the liner and the boot, etc.). This gives it a very Freestyle feel while also being very versatile of all types of terrain for experienced to expert riders.Your boot will retain its flex over time thanks to the ROTATION POINT technology.
    Heel support: LEVEL 3 liner
    The support of the heel is a key factor for steering the board properly, particularly at high speeds.For the End Zone, the LEVEL 3 liner uses 3 technologies: _ ECONOMIC SUPPORT FOAM ankle foam _ 3-POINT liner tightening + WEBLOCK system _ MECHANICAL LINK between the liner and the boot + 3D insole (conforms to the shape of the heel and the midfoot arch) + Dual thickness foam on the tongue at the instep (support and comfort) + Non-slip lining at the heel
    The ankle foam padding sections fill the hollow underneath and behind the ankle bone to hold the heel in place.The LEVEL 3 liner uses a foam with an exclusive Wed'ze shape and material - THE SHAPE was developed using a 40° average scan of the foot. It is perfect for holding the foot in place and is suitable for everyone. _ THE MATERIAL: a soft yet firm foamI can only recommend that you try out the End Zone: even without lacing them, you can feel the support. When riding, no pressure points.
    3 POINT liner tightening + WEBLOCK system
    The WEBLOCK system incorporates straps which wrap themselves around the foot, unlike simple eyelets which only tighten both sides of the boot.The effect is very important: you can clearly feel the straps located above and below the ankle bone as they wrap around the heel and hold it in place.A 3-point (instead of 4 points) tightening system has 2 advantages: _ SUPPORT: it holds the heel in place very well, _ WARMTH: it allows the blood to flow freely so that it can warm the toes
    MECHANICAL LINK technology
    We have added some plastic elements which create grooves between the liner and the boot: _ On the liner: grooves ratcheted in one direction _ On the boot: grooves ratcheted in the other directionOnce the boot has been tightened, there is no longer any movement between the liner and the boot. It is not physically possible. The aim is always to eliminate interference between the movement of the foot and the board, thereby making it easier to steer.
    Base: grip, traction, cushioning AND thermal insulation
    The JUMP sole provides lots of cushioning thanks to its EVA (material used in running trainers) midsole: 80% air) The EVA also provides low weight and thermal insulation.It is made of rubber and has a large GRIP zone with 3.5 mm lugs.It is perfect for getting to the top of a pipe, waiting your turn, taking off and landing as well as every other ride of the day.
    ROTATION POINT technology
    We have added a rotation points from the top of the boot on the bottom of the boot (like ski boots).This rotation point allows the top of the upper to rotate over the base when bending forwards. This prevents the materials of the boot from "breaking" and ageing to quickly. Your boots will retain their flex over time.
    _ leather reinforcement at the front and rear of the boot _ Wed'ze exclusive asymmetrical sole: inside, rubber outsole with high rise bumper. this provides protection for the specific situations encountered when snowboarding: when moving on flat surfaces with the rear foot attached. Indeed, when pulling the board along, it often touches the rear boot with the risk of the snowboard edge cutting into it!
    Weight1.780 kg in size 8
    Information / Concept / Technology
    boot: 80% synthetic polyurethane + 20% leather Liner: 100% synthetic polyester (lining and outer). Base: 70% rubber + 30% EVA

    Stockage tips
    At the end of the day, remove the liners from the uppers to ventilate them properly and dry quickly. I even recommend removing the insole of the liner so that it dries properly.

    Maintenance tips
    Wash with soapy water.

    Loading product reviews...

    Sort by
    There are no reviews for the product yet

    Write the first review

    Showing results

    Product added to wishlist