27.5x1.9/2.5 Presta Inner Tube 48mm

(2)

Write a review

Brand: BTWIN

Reference 8320817

There are not enough products in stock

S$ 5.00

(2)

Write a review

This inner tube is compatible with 27.5" diameter tyres, with a cross-section ranging from 1.90 to 2.50 with a 48 mm Presta valve.
27.5 x 1.90 to 27.5 x 2.50 Presta valve inner tube for 27.5" tyres.

Compatibility

27.5" tyres, with a cross-section from 1.90 to 2.50. ETRTO 47/64 - 584

Waterproof

Optimised composition to ensure your inner tube has a good seal.

Gender

NO GENDER

Sport Practices

CYCLING
MOUNTAIN BIKES
ALL MOUNTAIN MTB
SPORT TRAIL MTB
CROSS COUNTRY MTB

WHEEL SIZE

27.5"

VALVE TYPE

Presta - Small valve

TYRE ASSEMBLY

Inner tube

ETRTO

44-584
54-584
50-584
57-584

SECTION

2
2.1
1.95
2.2
2.25
2.15
2.4
2.3
> 12h
> 12h

AUTO-REPAIR

Standard

Warranty

2 Years

Technical Information

How to choose your inner tube

Check the information indicated on the sidewall of the tyre (diameter and width). For example, 27.5 x 2.10 means that the tyre is 27.5 inches in diameter and 2.10 inches wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example, 50-584 means a tyre that is 50mm wide and has an inner diameter of 584mm (approx. 27.5 x 2.00).

Removing an inner tube

Remove the old inner tube using B'Twin tyre levers

Checks to carry out before installing an inner tube

Check the condition of your tyre and replace it if necessary. Make sure no objects are lodged in the tyre. Check the condition of your tyre rim strip. A rim strip that is even slightly bent can cause punctures. Check that your rim does not have any other issues that could damage your inner tube.

Mounting the inner tube

Watch our video before you start. Pre-inflate the inner tube slightly to avoid pinching. Insert the valve, making sure you are using the correct valve for your rim. Put the inner tube entirely inside the tyre so that it fits inside the rim. Take care not to pinch the inner tube when fitting.

Mounting the tyre

Start mounting the tyre at the valve. Finish mounting the tyre opposite the valve to avoid pinching the inner tube. Never mount your tyre with a tool or a tyre lever, as you risk pinching and puncturing the inner tube.

Inflating the tyre

Inflate your tyre carefully, to the pressure recommended by the manufacturer (visible on the tyre sidewall in PSI or bars, 1 bar = 14.51 PSI). Regularly check that your tyre is in the correct position as you inflate it.

Tip from the pros

To avoid punctures from pinching and for the best tyre performance, we recommend that you check your tyres and inflate them to the suggested pressure before every ride.

Weight:

240g

Storage advice

Carry your inner tubes in a container to protect them from getting punctured (tool drum, original packaging…).

Tested by

To guarantee optimal quality, 100% of our inner tubes are inflated for a period of 8 hours.

Composition

Air chamber : 100.0% Rubber - Synthetic

There are no technical information to display. Please try again later.

Composition