The knobbly tread structure provides good traction on various types of terrain.
22 TPI carcass makes this tyre durable.
The structure of the knobs offers very little rolling resistance.
465 g. Stiff bead.
For 16" inner tubes and wheels.
CYCLING MOUNTAIN BIKES SPORT TRAIL MTB
To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the ground you are cycling on and therefore determines your tyre's performance. A tyre needs to be replaced when the centre knobs are worn down to the same height as the side knobs.
To remove your tyre, deflate the inner tube until no more air comes out. Once deflated, use a tyre lever to remove the tyre from the rim.
To put the tyre back on, place one of the beads (the stiff/soft part of the tyre, depending on the model, which determines the shape of your tyre), into the rim. Once you have done this, inflate your inner tube by approximately 30% before fitting it to the rim (inflating it beforehand reduces the risk of pinching the inner tube). Next, fit the second bead to the rim, starting at the opposite side to the valve.
Inflate your tyre carefully. The recommended pressure is indicated on the side of your tyre as well as on its product sheet (available online). Also, before each outing, make sure that your tyres are at the correct pressure for your ride.
When inflating your tyre, make sure you inflate it to the suitable pressure for the terrain you will be riding on and, above all, the weather conditions you will be riding in. When riding in rainy weather, lower the tyre pressure to increase the tyre's grip. On the other hand, you can increase the pressure when riding in dry weather.
Use : Mixed terrain Tyre size : 16x1.95 Bead : Stiff ETRTO : 47-305 TPI : 22 Weight : 500 g
This is a stiff bead tyre; avoid folding it as doing so can damage it. Store it in its original shape.
At B'Twin we design the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. This expertise is highlighted on our range of B'Twin tyres with the label "Designed in France".
Main part : 30.0% Rubber - Synthetic, Main part : 30.0% Rubber - Natural Rubber (NR) - Latex, Main part : 20.0% Steel, Main part : 20.0% Polyamide 6 (PA6)