We have designed this anti-shock pole for hiking and trekking enthusiasts who practice intensively on rough mountain terrain Pole with shock absorber to soften the impact on joints. The shock absorber can be deactivated whenever you want
Dense foam grip, long 3D design. Comfortable knob. Soft wrist-strap
Inside screw adjustment system. Unlockable anti-shock system.From 105 to 130 cm.
265 g / pole
3 telescopic sections. Collapsed length: 64 cm. Collapsed width: ~5 cm.
Aluminium 7075-T6. Tube diameter 18/16/14 mm. Tungsten tip
Supplied with a removable, replaceable summer basket.
How it was designed...
This model is entirely designed and approved by our team, at the foot of Mont Blanc. To fulfil the anti-shock promise, we have chosen this system with a spring integrated in the screw tightening system. We then designed a handle that enables powerful and comfortable grip whatever the position: along the tube for climbs and banking terrain, with the wrist-strap for efficient pushing and on the knob for descents.
How to adjust your poles to the correct length?
Hold the poles with your arms bent at a right angle. To adjust the length: unscrew the middle section, find the size of the pole you need and screw back tightly. Tighten more if you notice that the pole shortens as you use it. Do the same with the lower section. Never go over the STOP line to avoid breaking the pole.
Directions for use
These hiking poles are designed to help you balance, propel yourself and spread the effort between the arms and legs. To increase safety, check your pole's locking mechanism by pressing down hard on it before you start and at regular intervals. Do not attach to your backpack in stormy weather.
Maintaining your poles properly enables you to maintain optimal function and increase their lifespan. After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with water or without, with a soft brush or paintbrush. Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.
Why are the poles sold individually?
At Decathlon, we decided to sell our hiking/trekking poles individually. On the one hand, for usage reasons. Some people only want to use one pole. This therefore meets their needs. On the other hand, if one of your poles breaks, this means you only have to buy one and not a complete pair.
Our field testers. As well as these laboratory tests, Théo, our test engineer, makes sure that each model also undergoes trials on standardised test terrains. They allow us to confirm comfort, ease of adjustment, vibrations, etc. Finally, durability is also checked with a durability test mission that can reach up to 500 km.
We have designed this anti-shock pole for hiking and trekking enthusiasts who practice intensively on rough mountain terrain
Product plus point
Shock absorber that softens the impact of shocks
Store the poles without tightening the adjustment system to reduce the stresses on the system and protect their tightening power. Store poles in a dry place.
To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During the design stage, each model undergoes laboratory tests that reproduce these stresses (compression, bending in three places; etc.) until it breaks. We also test parts separately (tightening power, tearing, etc.). Finally, these tests are regularly repeated during production to guarantee consistent level of quality.
Pole with shock absorber to soften the impact on joints. The shock absorber can be deactivated whenever you want
Dark petrol blue
Shaft: 100.0% Aluminium
Handle: 100.0% Ethylene Vinyl Acetate
There are no technical information to display. Please try again later.
Designed for Our design team has designed these baskets for mixed terrain (rocks, soft ground etc)The set of 2 small diameter baskets provides good support on mixed terrain and prevents the poles from getting stuck between stones or in cracks.