All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584
    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584

    All Terrain 9 Grip 27.5x2.10 Stiff Bead Mountain Bike Tyre / ETRTO 54-584

    Write a review
    ROCKRIDER
    8386245
    There are not enough products in stock
    S$ 27.00
    This mountain bike tyre has been designed for recreational use on any type of trail. Tubeless and flex bead.
    Ideal for mixed, loose terrain.
    Write a review

    Check the stock availability in our stores

    Compatibility

    For 27.5" inner tubes and wheels.

    Traction

    The very high profile lugs offer optimal grip.

    Puncture resistance

    Light skinwall sidewalls, flex bead and 60 TPI for a more comfortable ride.

    Efficiency

    Excellent mud shedding thanks to the widely spaced lugs.

    Weight

    970 g. Flex bead.

    Waterproof

    Mounting the tyre without an inner tube requires the use of a liquid sealant.

    Gender
    NO GENDER
    Sport Practices
    CYCLING
    MOUNTAIN BIKES
    SPORT TRAIL MTB
    CROSS COUNTRY MTB
    ALL MOUNTAIN MTB
    WHEEL SIZE
    • 27.5"
    TYRE BEADS
    • Soft
    TYRE ASSEMBLY
    • Tubeless ready
    ETRTO
    • 53-584
    SECTION
    • 2.1
    TPI (Treads Per Inch)
    • 60
    PLAYING SURFACE
    • HYBRID SURFACE
    Warranty
    2 Years
    Technical Information
      • To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread is in direct contact with the terrain you are cycling on and therefore has a direct influence on the tyre's performance. A tyre needs to be changed when the centre knobs are worn down to the same height as the side knobs.
      • To remove your tyre, first deflate the inner tube until no more air comes out. Once deflated, use a tyre lever to remove the tyre from the rim.
      • To put your tyre back on, first start by placing one side of the tyre into the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube). Then, place the other side of the tyre into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.
      • Inflate your tyre carefully. The recommended pressure is indicated on the side of your tyre as well as on its product sheet (available online). Before each outing, make sure that your tyres are at the correct pressure for your ride.
      • When inflating your tyre, be sure to inflate it to the correct pressure for the terrain you will be riding on and especially the weather conditions. When riding in rainy weather, lower the tyre pressure to increase the tyre's traction. On the other hand, when riding in dry weather, you can increase the pressure for better performance.
      • This tyre can also be used as a Tubeless tyre (without inner tubes) when fitted to a Tubeless rim. Apply a special Tubeless liquid sealant to reduce the risk of punctures and improve air tightness. Preferably use a compressor or a high-pressure pump to inflate tubeless tyres. Tubeless Ready optimises grip and offers outstanding comfort.
    Storage advice
    This is a flex bead tyre that is easy to fold for easy transport and storage.
    Tested by
    At B'Twin we design the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. The tyre is then tested in our laboratories as well as in real world use by our professional cycling team to ensure outstanding quality. This expertise is expressed on our range of B'Twin tyres with the label "DESIGNED IN FRANCE".
    Composition
    Membrane : 50.0% Rubber - Ethylene Propylene Diene Monomer (EPDM), Membrane : 50.0% Rubber - Natural Rubber (NR) - Latex

    Loading product reviews...

    Sort by
    There are no reviews for the product yet

    Write the first review

    OOPS...

    we couldn't find a match for "laptop"

    Or find inspiration from our

    5000 productS & 60 sports

    WANT TO TELL US SOMETHING?

    SUPPORT-SINGAPORE@DECATHLON.COM or give us a call: 62254773

    we will be happy to help you and hear your suggestions

    Showing results

    Filter by

    Sort By
    Product added to wishlist
    Product added to the cartx
    Product deleted from the cartx