2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder
    2L Running Water Bladder

    2L Running Water Bladder

    Write a review
    KALENJI
    8393578
    S$ 15.00
    Designed for runners wanting to hydrate easily during a workout.
    to replace your old water bladder.Try the new fastening system!
    Size Size guide
    • 2L
    Write a review

    Check the stock availability in our stores

    Sport Benefits
    Capacity2 litres
    Easy maintenancevery wide fastening / opening system
    WatertightTeat locking mechanism
    Warranty2 Years
    Technical Information

    1
    pocket size:
    38cm X 18cm
    2
    hose length:
    100cm - you can cut it to the required length
    Information / Concept / Technology
    Composition
    Film : 70.0% Ethylene Vinyl Acetate (EVA), Film : 30.0% Polyethylene (PE) Tube : 100.0% Thermoplastic polyurethane (TPU) Handle : 100.0% Acrylonitrile butadiene styrene (ABS) Sliding bar : 70.0% Ethylene Vinyl Acetate (EVA), Sliding bar : 30.0% Polyethylene (PE) Teat : 100.0% Silicone On/Off System : 100.0% Polyethylene (PE) Film/Tube Connector : 70.0% Ethylene Vinyl Acetate (EVA), Film/Tube Connector : 30.0% Polyethylene (PE) Tube/Valve Connector : 100.0% Polypropylene (PP)

    Product test
    Empty the air from your water bladder. Shocks while running shake the rucksack and water pouch. If there is air in the water pouch, you will hear the water splashing throughout your run. To avoid this disturbance, make sure that you remove the air when filling the pouch. Turn upside down and let the air go up to the tube, then suck it out. Silence once more!

    Stockage tips
    do not leave water in the bladder more than 24 hours. Rince well using clean water after use and allow to dry before storing away.

    Maintenance tips
    empty water from bladder, clean it with dish washing liquid and rinse thoroughly, dry all elements while taking care to unscrew the tube. Do not put in dishwasher.
    Gender
    ADULT
    Sport Practices
    RUNNING
    TRAIL
    VOLUME
    • 2 L
    AUTONOMY
    • To 4 hours
    FREQUENCY
    • ALL FREQUENCIES
    LEVEL OF PRACTICE
    • ALL LEVELS
    INTENSITY
    • LOW INTENSITY
    • MID INTENSITY
    • HIGH INTENSITY
    DURATION
    • SHORT DURATION
    • MEDIUM DURATION
    • LONG DURATION
    DISTANCE
    • ALL DISTANCES
    WHEN
    • DURING EFFORT
    Colours
     
    Warranty
    2 Years
    Technical Information
      • In accordance with the law, our products do not contain Bisphenol A and are subjected to standard food contact tests.
      • 38 cm x 18cm, Pipe length: 100cm, you can cut it to the required length.
      • Remove air from water bladder. The impacts of the running motion shake the backpack and water bladder. If there is air in the water pouch, you will hear the water splashing around while you run. To prevent this problem, remove any air when filling the pouch by turning it upside down and directing the bubbles towards the tube and sucking them out… You're all set. Silence!
      • Removable slide plate for wider opening and easy filling and cleaning. The slide plate has holes for attaching your water bladder in bags with hooks. Avoid losing water when running with ON/OFF position on the bite valve: turn the grey part of the bite valve.To drink, turn the bite valve to ON and inhale to change the shape of the bite valve with the mouth.
    Storage advice
    Rinse 3 times before use and do not leave water in the bladder for more than 24 hours. Rinse thoroughly with fresh water after use and leave to dry before storing.
    Tested by
    All of our products and materials comply with applicable food contact standards and do not contain Bisphenol A (BPA).
    Composition
    Film : 70.0% Ethylene Vinyl Acetate (EVA), Film : 30.0% Polyéthylène (PE) Air Chamber : 100.0% Thermoplastic polyurethane (TPU) Handle : 100.0% Acrylonitrile butadiene styrene (ABS) Sliding bar : 70.0% Ethylene Vinyl Acetate (EVA), Sliding bar : 30.0% Polyéthylène (PE) Teat : 100.0% Silicon On/Off System : 100.0% Polyéthylène (PE) Film/Tube Connector : 70.0% Ethylene Vinyl Acetate (EVA), Film/Tube Connector : 30.0% Polyéthylène (PE) Tube/Valve Connector : 100.0% Polypropylene (PP)

    Loading product reviews...

    Sort by
    There are no reviews for the product yet

    Write the first review

    Customers who bought this product also bought:

    Showing results

    Filter by

    Sort By
    Product added to wishlist