Our team of divers developed this accessory to change from a DIN to Yoke (INT), allowing you to use an INT (yoke) scuba tank The must-have accessory for you regulator bag to ensure you can use your dive regulator regardless of the dive centre's tanks!
Convert a DIN regulator so it can be used with INT valves.
DIVING DIVING SCUBA DIVING
LEVEL OF PRACTICE
Yoke adaptor (INT) to DIN (G5/8) female. Length: 9 cm Meets the standard EN 250 Adapts to all types of 232 bar or 300 bar regulators. Caution: this adapter can be used at a maximum pressure of 232 bar only.
Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself.Never use spray cans, because the gas propellent can attack the plastic. Use a silicone grease to lubricate the seals and increase their lifespan.
Servicing the regulators
SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year.This two inspections must be made in a SUBEA-TRIBORD certified workshop. A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Bottle/Body : 100.0% Brass Cap : 80.0% Brass, Cap : 20.0% Polyamide
There are no technical information to display. Please try again later.