Our team of enthusiasts has developed this kayak for beginners to tour with 2 or 3 people, in calm waters, from 2 to 3 hours A sturdy inflatable canoe-kayak with high-pressure Dropstitch floor and 3 raised adult seats for good paddling comfort. A good compromise between stability and performance.
For 2 to 3 people, up to a maximum of 245 kg (540 lbs).
Easy assembly / dismantling
Inflates in 10 minutes with a dual action hand pump.
Side tubes and a wide inflatable floor for good stability.
The bow shape gives the kayak good glide performance. 3 keels.
Raised seat for comfort when at rest and when paddling.
Dropstitch floor. Tarpaulin side tubes with pressure relief valves
CANOEING KAYAKING / STAND UP PADDLE CANOEING KAYAKING TOURING KAYAKING
NUMBER OF USERS
LEVEL OF PRACTICE
LOCATION OF PRACTICE
Technical data and weight.
INFLATED SIZE Length: 410 cm Width: 102 cm FOLDED & BAGGED SIZE Height: 72 cm Width: 45 cm Thickness: 37 cm Weight: 18 kg Maximum floor pressure: 0.34 bar (5 psi) Side tube and seat pressure: 0.2 bar (3 psi) Number of seats: 2 or 3 seats Content: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap. PUMP NOT INCLUDED For use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on. Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on. Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from over-inflation. When this happens, you may notice a hissing sound. This hissing is normal, it can happen during inflation or after prolonged exposure to sun. It will stop once the kayak reaches the correct internal pressure
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position. Position the seats on the floor using the velcro areas located under the seat and on the floor. Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck. The boat is ready to be launched.
Thanks to the stiffness of the Dropstitch floor
Remove the seats and slightly deflate the floor to make it easier to rinse out. Rinse the kayak, bottom and seats with clean water after each use to avoid damage from sand, salt water and sun. Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.
Disassembly & folding
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins. Deflate the side bladders. The valves are located at the back of the kayak. WARNING: Do not unscrew the pressure relief valves at the front. Fold the floor. Fold the rest of the kayak in half lengthwise. Flatten the front fin base. Lay the rolled floor on the front end. Roll the kayak to the rear end. Strap the kayak.
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes. The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
Spare parts are available for Itiwit X100+ kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some. Drop Stitch floor: 8561072 Pressure relief valve: 8561069 Carry bag: 8605095 Paddle rip-tab strap: 8561070
Directions for use.
We recommend that you practise with a buoyancy vest.
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.