At the foot of Mont Blanc, our team of hikers developed this low-cost waterproof jacket for occasional hiking. Make sure you have optimum comfort with this cut that fits all shapes, and under-arm ventilation to enable you to hike at the correct temperature.
Be protected, even in a downpour, with its 5000 mm Schmerber coating
20-cm side openings and perspiration-wicking component (RET = 12)
Just 550 g in size M
Removable & adjustable hoodAdjustable cuffs. Tightening cord at bottom of jacket
2 zipped hand pockets and 1 zipped inside pocket to keep your items safe.
HIKING HIKING MOUNTAIN HIKING
A SOURCE OF
LEVEL OF PRACTICE
LOCATION OF PRACTICE
This jacket has a cut that fits all shapes while still looking very feminine. A warm layer such as a fleece or light sweater can be worn underneath. Inner lining can also provide more comfort. You can choose your usual size, or a size above if you don't want it to be worn fitted.
The hood is removable thanks to press studs. It can be adjusted in height using an elasticated cord and adjusted in depth thanks to a Velcro tab located at the back of the hood.
CONSTRUCTION OF THE JACKET
This jacket is constructed with 2 coated layers, including a mesh lining (large mesh lining) ‘2 layers’ means there is the outer fabric and the lining. A coating is applied to the inside of the fabric, it is similar to a resin that makes the component waterproof, while remaining breathable. The inner lining of the jacket has the role of protecting this coating
We measure the water resistance of the fabric and the water resistance of the entire jacket. The waterproofness of the fabric is 5000 mm Schmerber:that means that it withstands the pressure exerted by 5000 mm of water column (ISO standard test). This jacket has also been validated by a shower test reproducing the conditions of a shower, or 12 cm of rain in 2 hours. For the most curious, all the details are here: https://www.quechua.fr/conseils/comment-mesurer-limpermeabilite-dune-veste-a_104488
HOW TO RESTORE THE WATER-REPELLENT PROPERTIES OF MY JACKET?
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water, and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use. All the steps to restore the water-repellent properties are below: https://conseilsport.decathlon.fr/conseils/comment-reactiver-la-deperlance-de-sa-veste-tp_22965
The breathability of a material is its capacity to wick away the water vapour generated by perspiration. During intense effort, it is, therefore, essential to wear very breathable clothing so you do not stay wet. Breathability is measured by the RET, the resistance of a fabric to the evacuation of moisture. The lower this coefficient, the more breathable the fabric is: RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: low breathability
Always make sure that this waterproof protective garment is completely dry before storing it.
Our design team is based at the foot of Mont Blanc, in Haute-Savoie (France). All year round, we create and develop products that are attractive, simple and technologically advanced. These are then ruthlessly tested in the field, as we remain convinced that only through rigorous testing under real world conditions, like the ones you will be using them in, can we continue to provide you with better products than ever.
Main fabric : 100.0% Polyester Main lining : 100.0% Polyester Secondary lining : 100.0% Polyester Coating : 100.0% Polyurethane
There are no technical information to display. Please try again later.