The outcome of a long development process with enthusiastic and demanding trekkers, we have created this durable pole to support you on your long hikes Going hiking or trekking and need to carry your poles easily and be sure they are built to last? This model is the most compact and sturdy in the range.
Foam handle, long 3D design. Long, soft knob. Soft wrist-strap.
External lock. Precise and fast adjustment. From 110 to 130 cm. Collapsed: 36 cm
275 g / pole
5 part folding pole. Collapsed length: 36 cm. Collapsed width: ~ 6 x 6 cm.
Aluminium 7075-T6. Large tube diameter 20/18/16/16/16 mm. Tungsten tip
Supplied with: Removable and replaceable summer basket + protective tips
How it was designed...
Fully designed and validated by our team at the foot of Mont Blanc, a team with enthusiastic and demanding trekkers, during legendary treks: Mont Blanc, Atlas Mountains in Morocco, Tenerife. The pole’s durability has also been tested by a 550 km mission test in the Canaries and the Pyrenees (GR10).
Why have we worked hard on durability?
You trek to enjoy the calm of great expanses which sometimes takes you far from civilisation. You also carry your belongings for several days. Therefore, you need to rely on the resistance of your poles. We have selected wider tubes in top of the range aluminium. We have secured the push-pin area with internal reinforcement. Compression test results (pressure on the pole axis) show that this model can therefore support 560 N (~56 kg) per pole.
Why have we focussed on compactness?
To get to your trek you will sometimes have to take transport. You will also have to carry all your equipment in your bag. It’s therefore much more practical to have compact poles. Once collapsed, these poles fit in the side pocket of your trekking backpack.
How did we design this handle?
We favoured EVA foam, soft material, perfect for handling perspiration and resisting tears. We added a long grip underneath the handle for a lower hold uphill and on banking terrain. The knob is the most comfortable in the range with its long, rounded shape and soft material. It provides good grip from above. Finally, we designed the wrist-strap without extra thickness and few seams to avoid blisters.
The lower tube has undergone special treatment called shot-blasting. This is a mechanical treatment to the surface that does not require anodisation and is therefore less polluting. There is no effect on the pole’s resistance. It gives a granular appearance and the natural colour of the aluminium remains. The (inevitable) scratches will therefore be less visible. The other four tubes are still anodised as their sliding ability requires smooth surfaces.
How to adjust your poles to the correct length?
Hold the poles with your arms bent at a right angle. To use the pole: firstly, extend the pole until the “click” of the push-pin. Refer to the instructions attached to the pole. To adjust the length: open the outer lever, slide the tube to the desired length and close the lever. Never go over the STOP line to avoid breaking the pole.
Directions for use
These hiking poles are designed to help you balance, propel yourself and spread the effort between the arms and legs. To increase safety, check your pole's locking mechanism by pressing down hard on it before you start and at regular intervals. If you notice that your pole tends to slide down, the locking mechanism turn ring needs adjusting. Open the lever and tighten the turn ring by a quarter or half turn. Do not attach to your backpack in stormy weather
Maintaining your poles properly enables you to maintain optimal function and increase their lifespan. After use, if water has got into the pole, take the parts apart and allow to dry. Clean any dust and mud with or without water using a soft brush or paintbrush. Once dry, you can reassemble the parts. We recommend that you do not try to oil or grease them.
Why are the poles sold individually?
At Decathlon, we decided to sell our hiking/trekking poles individually. On the one hand, for usage reasons. Indeed, some people prefer to use just one pole. This therefore meets their needs. On the other hand, if one of your poles breaks, this means you only have to buy one and not a complete pair.
Our field testers. As well as these laboratory tests, Théo, our test engineer, makes sure that each model also undergoes trials on standardised test terrains. They allow us to confirm comfort, ease of adjustment, vibrations, etc. Finally, durability is also checked with a durability test mission that can reach up to 550 km in the Canaries and the Pyrenees (GR10).
The outcome of a long development process with enthusiastic and demanding trekkers, we have created this durable pole to support you on your long hikes
Product plus point
Ultracompact folding system
Store the poles without tightening the adjustment system to reduce the stresses on the system and protect their tightening power. Store poles in a dry place.
To set our thresholds, we have measured the stresses on the poles in the most demanding situations. During the design stage, each model undergoes laboratory tests that reproduce these stresses (compression, bending in three places, etc.) until it breaks. We also test parts separately (tightening power, tearing, etc.). Finally, these tests are regularly repeated during production to guarantee consistent level of quality.
Going hiking or trekking and need to carry your poles easily and be sure they are built to last? This model is the most compact and sturdy in the range.
Shaft: 100.0% Aluminium
Handle: 100.0% Ethylene Vinyl Acetate
There are no technical information to display. Please try again later.