Designed to connect the Solognac 20-60x60 spotting scope to a Canon reflex camera. The adapter allows you to turn your Solognac spotting scope into a telephoto lens for a Canon reflex camera. Just screw one side onto the spotting scope and the other onto the camera body
Have you always dreamt of photographing that roe deer as he walks through his favourite meadow every morning? or the robin perched in the tree in front of your house? The adapter allows you to turn your Solognac spotting scope into a telephoto lens for a Canon reflex camera. Capture the best wildlife moments with your Solognac spotting scope and share your pictures on our Solognac and Instagram pages!
65 mm diameter and 30 mm thick
Instructions for use
One side screws onto the spotting scope once the eyepiece has been removed from just above the zoom adjustment ring. The other side screws onto the body of your reflex camera, taking the place of the normal camera lens. Remember to tighten the small screw on the side of the adapter to prevent the camera body turning.
The mount adapter has no electronics. Photos should be taken in manual mode and with manual focus using the scope's focusing mechanism. Start off by setting the ISO to 1600, with an aperture of f/5.6 and shutter speed 1/500 sec. If the photo is dark, increase the ISO to 3200 and reduce shutter speed to 1/250 sec, only if using a tripod. If the photo is too light, reduce the ISO to 800, with an aperture of f/11 or shutter speed 1/1000 sec. Continue adjusting until you find the optimum settings.
Structure : 100.0% Aluminium
There are no technical information to display. Please try again later.