Tab on the back of the hood enables hooking it up.
MAINTENANCE OF PRODUCT
Do not bleach
Do not iron
Do not dry-clean
Do not tumble dry
Neoprene hood 2mm thick. No seams at the ears and neck to avoid friction.
Tips for maintaining your neoprene products?
1) Soak the inside and the outside of the wetsuit in clean water after each session. 2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water. 4) Dry on a wide hanger in a dark and well ventilated place. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease
Adjust the thickness, adjust your warmth!
When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
Rinse in clean water after use
Developed by our teams, this very flexible diving hood was developed to protect the scuba diver's head in warm water of more than 22°C.
Product plus point
Reversible hood with an air expulsion system
Dry your wetsuit out of the sun and well clear of all sources of heat.Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
A 2mm diving hood for protecting your head during your sessions.