Do you want to hike in snowy and cold weather? Our design teams created this warm and waterproof jacket, which is comfortable down to -10°C. Ideal for hikes in the snow: high-coverage lined hood, warm pockets and wide wadded flap behind the zip for an extra 3°C. Waterproof and comfortable down to -10°C.
150g/sqm padded lining on the body and 100g/sqm on the arms. Fleece back.
Waterproof coating (2,000 mm schmerber rating). Fully taped seams.
Limits snow entering
Adjustable hood rip-tab sleeve adjustment & jacket tightening system with toggle
Ease of use
2 fleece-lined hand pockets with press-studs, 1 inside chest pocket
100% recycled fleece lining Biton thread in sleeve fabric -19% CO2 emissions
Can I be sure that my jacket is warm enough for my winter hikes?
We developed this jacket for wintry conditions: cold, rain and snow. The insulation is provided by the 150 g/sqm wadding on the body and 100 g/sqm on the arms combined with a fleece back (synthetic insulating component thanks to the air trapped in its fibres.) We added an inner flap closed with a zip to block incoming cold air. The system is supplemented by a drawcord and toggles at the hem to make the jacket comfortable down to -10°C.
How does my jacket protect me from outdoor conditions?
Your jacket was designed with a waterproof outer component that keeps out water and wind. In winter, to stay warm, you must also protect your head, hands and feet. The warm hood, Velcro tightening tabs and high collar prevent the cold from getting in. Two warm, very soft fleece pockets protect your hands from the cold.
How can I be sure that my jacket is 100% waterproof?
We designed your jacket with a coating on the outer fabric to make it waterproofWe measure a fabric's resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard)The higher the water pressure the more waterproof the fabricA component with a 2000 mm waterproof rating can withstand the pressure of a 2000 mm column of water (Schmerber)Validated in a shower test under 60 L/sqm/hour of water, which is roughly equivalent to a 2-hour rain shower
Water often gets in through the seams. Does my jacket have taped seams?
Your jacket is waterproof thanks to the fully taped seams. Waterproof tape is added to the seams inside the garment to make them watertight so that water cannot enter through the more vulnerable areas. We validated the waterproofing with a shower test specially designed to replicate the conditions of a two-hour shower. We also wore it in the field in all weather conditions to make sure that it is suited to your activities.
A practical jacket with smart details
Lots of places to keep all your accessories safe and handy (tissues, keys, phone ...) during your hikes. Two lined pockets under a flap with a press-stud fastening on the outside and a secure pocket with a rip-tab fastening inside. A secure zip pocket also available on the chest.
How to preserve the technical qualities of my jacket
The water-repellency of a fabric is its ability to let the water slide off its surface, without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products (spray or liquid) for this purpose are available in our stores.
A comfortable everyday jacket for the cold.
Jacket designed to fit over a warm second layer such as a fleece or light down. Its classic cut is ideal for protecting you from the cold and wind during your winter hikes on all types of terrain.
Sizing and fit information
Close-fitting feminine cut. The jacket is designed to be worn with a warm second layer such as a fleece or a light down jacket.
How to dress properly for hiking in the snow
To dress properly in winter, whatever your activity, we recommend using the 3-layer principle: layer 1: The high-tech base layer transfers moisture away from the body to keep your skin dry. layer 2: The second layer (fleece, sweater) provides warmth and transfers moisture outwards. layer 3: The jacket protects from the outdoor conditions: rain, snow, wind. The whole outfit must be breathable in order to eliminate moisture.
How does my product warranty work?
This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be repaired or exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.
Product environmental impact comparison score
The environmental impact of the product is calculated based on its entire life cycle and using different indicators. An ABCDE score is provided to help you easily identify the most environmentally friendly products by comparing the same type of product. Decathlon actively promotes this initiative. Find all our sustainability initiatives at http://developpement-durable.decathlon.com/
MAINTENANCE OF PRODUCT
Machine wash - 40° max - normal
Do not bleach
Tumble dry - low heat
Do not iron
Do not dry-clean
Padding: 100.0% Polyester
Main fabric: 100.0% Polyester
Yoke: 100.0% Polyamide
Lining: 100.0% Polyester
Coating: 100.0% Polyurethane
There are no technical information to display. Please try again later.