Designed and developed in the French Alps, this semi-freestanding 3 seasons trekking 1 person tent offers comfort and space and is ultra lightweight and compact With its Y-shaped dome structure, the tent offers optimal and functional space: 3 pockets, 1 door and 1 secured porch for your backpack up to 50-70 L. Separate flysheet and bedroom.
Total weight 1.3 kg Compact & compressible bag 4.2 L Dimensions 39 x 11 x 10 cm
60 cm wide per person. Bedroom height 95 cm. 1 door, 1 porch, 3 pockets
Resists 60 km/h winds (force 7): certified in a wind tunnel on a turntable.
Easy assembly / dismantling
Semi-freestanding Y-shaped dome structure Separate flysheet & bedroom 1 pole
Water column (Schmerbers): Flysheet > 2,000 mm Bedroom groundsheet > 3,000 mm
Flysheet. Door with mosquito screen. 2 large top ventilation areas.
Fabric lets daylight through.
TREKKING TREKKING SEVERAL DAYS MOUNTAIN TREKKING BACKPACKING DESERT TREKKING TROPICAL TREKKING
NUMBER OF USERS
NUMBER OF ROOMS
Assembly with poles
A SOURCE OF
Dimensions and weight, Folded dimensions
Total weight 1.3 kg Separable parts to help transportation. Flysheet 365 g Bedroom 420 g Pole kit 290 g Pegs (10 pieces) 100 g Bags 45 g + 12 g Guy ropes 18 g Repair kit (ferrule, patch) 20 g To protect your product and increase protection from the sun and bad weather, you can complement your Trek 900 1P tent with a groundsheet with reference: 8545723 (150 g). Weight, volume and dimensions can vary slightly due to manufacturing tolerances.
Dimensions and capacity
Bedroom length 210 cm Bedroom width 60 cm to the head, 70 cm to the pelvis and 50 cm to the feet. Bedroom height 95 cm Total height 110 cm Side porch around 70 cm wide and protected by a built-in sheet which shelters your equipment from the sun and bad weather. This provides storage space for 1 backpack up to about 70 litres. 3 pockets (1 head and 2 top) to keep and organise your belongings. 1 hook & loop for ropes
Structure, poles and pegs
Lightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 8.3 mm aluminium. Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium). Non-anodised for a lower environmental impact. Simple Y-shaped dome: the main pole splits into 3 feet giving a semi-freestanding structure. Top pole provides volume and therefore capacity.
Separate flysheet and bedroom. Traditional pitching method: bedroom on the ground and clipped to the poles. Cover the whole tent with the flysheet. Adjust the tautness. If needed, the bedroom can be dismantled from inside. Intuitive pitching thanks to colour coding on the pole, bedroom and flysheet. When it rains, to pitch the flysheet first, you will need the compatible groundsheet (ref 8545723).
Forclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (4 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior). Seams sealed with thermo-bonded strips. Multi-component bedroom combining breathability, wind protection and prevents condensation
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To guarantee its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 60 km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Ventilation and condensation prevention
Bedroom with mosquito net sections for ventilation and water-repellent fabric sections to protect from condensation and draughts. There are 2 large top ventilation areas that you can close using a Velcro strip. To limit condensation inside the tent, it must be correctly assembled, canvas taut, but not excessively so. Two-way zips on the door to keep it open. The use of ventilation and good air circulation limits humidity inside your tent
3 seasons tent: your tent will protect you from difficult weather conditions that you may encounter in spring, summer or autumn. The tent will withstand light snowfall but is not designed for heavy loads that would weigh on its structure. When it snows, shake your tent regularly to make the snow fall to the ground and avoid too much weight being supported by your tent’s structure.
The poles are coloured using an innovative anodising method which eliminates the use of nitric and phosphoric acids. Non-anodised tent pegs: Your tent pegs may have a “rough” or “used” appearance but they still have all their technical and resistant features; not coloured or anodised (no acid is used since this only has an aesthetic effect). These factors help to limit the environmental impact of your product.
Repair and after-sales service
As designers and users who love our field, we care about the durability of our products, which is why all our tents are designed to be repairable. You will find the detachable parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, on the website or at the address support.decathlon.fr If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferrule, patch): 20 g
After use or cleaning, do not store your tent until it is perfectly dry to prevent odours and mould forming.
Waterproof testing of Forclaz tents take place with the tent assembled, under 200 litres of water/sqm/hour (tropical rain) for 4 hours, excluding water entering through seams, flaps, openings, zips, etc. The water column test (=mm Schmerbers) measure the fabric’s waterproofness. We test all our tents in a wind tunnel on a turntable on all 4 sides. We also test the parts (abrasion, tearing, split, etc.).
Main fabric : 80.0% Polyester, Main fabric : 20.0% Thermoplastic Polyurethane Inside room : 65.0% Polyamide, Inside room : 35.0% Polyester Pole : 100.0% Aluminium
There are no technical information to display. Please try again later.