Designed and developed in the French Alps, this semi-freestanding 3 seasons trekking 1 person tent offers comfort and space and is ultra lightweight and compact With its Y-shaped dome structure, the tent offers optimal and functional space: 3 pockets, 1 door and 1 secured porch for your backpack up to 50-70 L. Separate flysheet and bedroom.
Total weight 1.3 kg Compact & compressible bag 4.2 L Dimensions 39 x 11 x 10 cm
60 cm wide per person. Bedroom height 95 cm. 1 door, 1 porch, 3 pockets
Resists winds of 60km/h (Force 7): validated in wind tunnels on rotating plate.
Easy assembly / dismantling
Semi-freestanding Y-shaped dome structure Separate flysheet & bedroom 1 pole
Water column (Schmerber): Flysheet > 2,000 mm Bedroom groundsheet > 3,000 mm
Flysheet. Door with mosquito net.2 large top ventilation areas.
Fabric that lets daylight through.
Dimensions and weight, Folded dimensions
Total weight 1.3 kg Separable parts to help transportation. Flysheet 365 g Bedroom 420 g Hoop kit 290 g Pegs (10 pieces) 100 g Covers 45 g + 12 g Guy ropes (4 pieces) 18 g Repair kit (ferrule, patch) 20 g
To protect your product and improve your ground and weather protection, you can complete your Trek 900 1P tent with the groundsheet reference: 8545723 g).
Weights, volumes & dimensions may vary slightly due to production tolerances.
Size and living space
Bedroom length 210 cm Bedroom width 60 cm to the head, 70 cm to the pelvis and 50 cm to the feet. Bedroom height 95 cm Total height 110 cm
Side porch around 70 cm wide and protected by a built-in sheet which shelters your equipment from the sun and bad weather. This provides storage space for 1 backpack up to about 70 litres. 3 pockets (1 head and 2 top) to keep and organise your belongings. 1 hook & loop for ropes
Architecture, tent poles and tent pegs
Lightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 8.3 mm aluminium. Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium). Non-anodised for a lower environmental impact.
Simple Y-shaped dome: the main pole splits into 3 feet giving a semi-freestanding structure. Top pole provides volume and therefore capacity.
Separate flysheet and bedroom. Traditional pitching method: bedroom on the ground and clipped to the poles. Cover the whole tent with the flysheet. Adjust the tautness. If needed, the bedroom can be dismantled from inside. Intuitive pitching thanks to colour coding on the pole, bedroom and flysheet.
When it rains, to pitch the flysheet first, you will need the compatible groundsheet (ref 8545723).
Forclaz tents are laboratory-tested: pitched tent, 200 litres/m²/hour (4 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group. 20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior). Seams taped with heat-sealed strips. Multi-component bedroom combining breathability, wind protection and prevents condensation
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind. To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 60km/h, measured near ground level. Our tents are certified by the CSTB independent laboratory in Nantes.
Ventilation and condensation prevention
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. There are 2 large top ventilation areas that you can close using a Velcro strip. To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Two-way zips on the door to keep it open. The use of ventilation and good air circulation limits humidity inside your tent
3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure. In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
The poles are coloured using an innovative anodising method which eliminates the use of nitric and phosphoric acids. Non-anodised tent pegs: Your tent pegs may have a “rough” or “used” appearance but they still have all their technical and resistant features; not coloured or anodised (no acid is used since this only has an aesthetic effect). These factors help to limit the environmental impact of your product.
Repairs and After-sales service
As designers and users who love our playing field, we care about the durability of our products, that’s why all our tents are designed to be repairable. You will find the detachable parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, on the website or at the address support.decathlon.fr If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store. Repair kit (ferrule, patch): 20 g
Your tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun. We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
MAINTENANCE OF PRODUCT
Do not wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry-clean
Main fabric: 20.0% Thermoplastic Polyurethane, 80.0% Polyester
Inside room: 35.0% Polyester, 65.0% Polyamide
Pole: 100.0% Aluminium
There are no technical information to display. Please try again later.