CLEARANCE

SWIMMING GOGGLES 500 B-FIT BLUE GREEN MIRRORED LENSES

SWIMMING GOGGLES 500 B-FIT BLUE GREEN MIRRORED LENSES

(8)

Write a review

Brand: NABAIJI

Reference 8547668

There are not enough products in stock

S$ 15.00 S$ 30.00
-S$ 15.00

(8)

Write a review

B-FIT swimming goggles offer maximum STABILITY without sacrificing COMFORT . Perfect for the most intensive training sessions! Anti-fogging treatment
B-FIT swimming goggles offer maximum STABILITY without sacrificing COMFORT while swimming. The perfect goggles for the most intensive training sessions!

Field of vision

Limited field of vision, <100°, but good level of brightness.

Stability

Excellent stability thanks to the compact design

Adjustable

Interchangeable nose bridge (3 sizes), split head strap with side adjustment.

Anti-fogging

Anti-fog treatment on the inner surface of the lenses.

Waterproof

Very flexible seals with a great adaptability to fit the face.

Gender

UNISEX ALL AGES

Sport Practices

SWIMMING
SWIMMING
SWIMMING

FIELD OF VISION

Wide field of vision

NOSE BRIDGE TYPE

Interchangeable nose bridge

GLASS CATEGORY

Miror lense

LEVEL OF PRACTICE

INTERMEDIATE

Colours

Warranty

2 Years

Technical Information

- The appearance of fog depends on several factors, the difference in temperature between the body and the water, humidity levels, etc. Wear due to friction is one of the main causes. If your goggles fog up, dip your lenses in the water and a protective film will reform. After a certain amount of time it is normal for the performance of the anti-fog coating to be diminished. We offer an anti-fog marker which reactivates the ageing anti-fog coating and increases the lifetime of your goggles.
- The watertightness of the swimming goggles is dependent on the proper fit of the skirts with the shape of your face. Before purchase, we advise you to do the "suction" test without the strap. If the goggles stay on the face by themselves via slight suction, the product will be watertight during your swim. They also locate any points of discomfort of the model on your face. One-size model with 3 interchangeable nose bridges
- Swimming goggles suited to the shape of your face do not need to be worn tight. Goggles that are too tight can cause discomfort, leave marks and sometimes even let in water. There is no need to press on the lenses with your hands, a slight suction effect is generally enough for most swimming sessions without letting water in. The straps should ideally sit 2 to 3 cm above the ears. This is the best position for hold and comfort.
- We recommend: - rinsing your goggles (only if necessary) by simply dipping them in water - avoiding directing powerful jets of water at the inner surface of the lenses. - storing the goggles in their case after each session to prevent damage to the lenses (on the inner surface as there is an anti-fog coating and on the outer surface to prevent scratches) - not exposing them to temperatures of over 60°C DO NOT TOUCH/RUB THE INSIDE OF YOUR LENSES
- The colour of your goggles should be suited to your swimming location and its lighting. If you swim outside or in a swimming pool with bright lighting, prioritise smoke lenses for greater comfort and to limit the glare. If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses. The BFIT swimming goggles are available in different lens tints.
- Complies with standard: Q/BT 4734 - 2014, all the Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint. Looking directly at the sun is dangerous and can lead to irreversible eye damage.

Storage advice

Put the swimming goggles back in their box after use. Important: do not touch the inner surface of the lenses as this could destroy the anti-fog treatment

Tested by

Nabaiji swimming goggles comply with PPE regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface

Composition

Lens : 100.0% Polycarbonate (PC) Joint/Gasket : 100.0% Styrene Ethylene Butadiene Styrene (SEBS) Strap : 100.0% Silicon Buckles : 100.0% Polycarbonate (PC) Packaging : 100.0% Polypropylene (PP)

There are no technical information to display. Please try again later.

Composition

Product Manual

Click here to view the product manual