Need to keep your drinks hot or cold for several hours? Our designers have developed this light, hard-wearing and insulating stainless flask. This insulated flask keeps liquids hot or cool. 30% lighter than a classic isothermal bottle. Locking top with quick opening and integrated filter. / 0.8 litre
Starting temperature 95°C: 74°C after 6hr. Be careful with hot liquids.
Ease of use
Quick opening with 1 hand, top can be locked with the handleStainless steel366 g
Easy to clean thanks to the screw top. Stainless steel internal wall.
Double-wall construction in 18/8 (304) stainless steel with an air gap.
HIKING TREKKING HIKING TREKKING SEVERAL DAYS FAST HIKING MOUNTAIN HIKING NATURE HIKING SNOW HIKING BACKPACKING MOUNTAIN TREKKING DESERT TREKKING ARCTIC TREKKING TROPICAL TREKKING
COOK /DRINK/ EAT
LEVEL OF PRACTICE
Advice for maximising the performance of your isothermal bottle.
The fuller the bottle, the better it is at keeping the contents hot or cold. Warning, when using hot liquids, the flask is very well insulated, liquids will remain hot for a long time! We use a double stainless steel wall with a vacuum between to block thermal exchanges by conduction or convection. To block exchanges by thermal radiation, a fine layer of copper covers the outside of the inner wall.
The top is easy to open with one hand by pressing on the white button marked "PRESS". During transport, you can lock this button by sliding the white button down. A red area appears, indicating that the top is locked and it can no longer be pressed. The top has an integrated filter to keep out large tea leaves or infused fruits out of your cup. Not suitable for very finecut teas.
Dishwasher safe (top + body) Warning, do not lose the top seals. Dry with the top off. The top's seal can be removed for a complete wash and dry.
Rinse the entire product 3 times with clean water before first use.
Materials and regulations
All our products and materials meet the food contact standards currently in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force. We have chosen to use 18/8 (304) stainless steel for the flask's body for its food safety, and for the top, a heat and shock-resistant polypropylene.
Weight and dimensions
Volume: 0.8 litre Dimensions: Ø 8.2 cm x 26.5 cm Weight: 366 grams (Body 320 grams and top 46 grams)
To reduce the environmental impact of this flask, we have done the following: - Choice of a very durable material (stainless steel) that is guaranteed 5 years - Top can be purchased separately for repairs and the seals are easy to replace - No use of varnish - Marked by laser engraving - Solvent-free paint (powder coating) - Reduced packaging and shipping packing - Produced in a factory that uses 100% renewable energy
Wash and dry before storing. Store in a clean and dry place.
This insulating product is tested according to 3 protocols1/Water at 95°C is placed in the product which is closed & placed in an oven at 20°CThe drop in temperature of the water after 6 hours was 74°C.62°C after 12 hr, 48°C after 24hr2/Water at 95°C is placed in the product, which is closed and placed in an oven at 5°CThe liquid reaches 60°C after 5hr203/Water at 5°C is placed in the product, which is closed & placed in an oven at 32°C. The liquid reached 15°C after 16hr30.
Bottle/Body : 100.0% Stainless Steel 304 Lid : 81.0% Polypropylene, Lid : 10.0% Polyamide 6.6, Lid : 8.0% Silicon, Lid : 1.0% Stainless Steel
There are no technical information to display. Please try again later.