Need to keep your drinks hot or cold for several hours? Our designers have developed this light, hard-wearing and insulating stainless flask. This insulated flask keeps liquids hot or cold. Significantly lighter than a standard isothermal flask. Locking top with quick opening and integrated filter. / 0.8 litre
Starting temperature 95°C: 74°C after 6 hours. Be careful with hot liquids.
Ease of use
Quick opening with one hand, top can be locked with the handle. S/steel 366 g.
Double stainless steel int. wall con.18/8 (304) with an air gap between the two.
Easy to clean thanks to the screw top. Stainless steel internal wall.
Advice to maximise the performance of your isothermal bottle.
The fuller the flask, the better it is at keeping the contents hot or cold. Be careful when using hot liquids, the flask is extremely well insulated, liquids will remain hot for a long time! We use a double stainless wall with a vacuum between to block thermal exchanges by conduction or convection. To block exchanges by thermal radiation, a fine layer of copper covers the outside of the inner wall.
The top is easy to open with one hand by pressing on the white button marked "PRESS". When carrying the flask, you can lock this button by sliding the white button down. A red area appears, indicating that the top is locked and it can no longer be pressed. The top has an integrated filter to keep large tea leaves or infused fruits out of your cup. Not suitable for very fine cut teas.
Dishwasher safe (top + body) Be careful not to lose the top seals. Dry with the top off. The top's seal can be removed for a complete wash and dry.
Rinse the entire product 3 times with clear water before using for the first time.
Materials and regulations
Our products and materials meet the food contact standards in force. They do not contain Bisphenol A (BPA) in accordance with the French regulations in force. We have chosen to use 18/8 (304) stainless steel for the flask's body, recognised for its food safety and for the top, a heat and shock resistant polypropylene.
Weight and dimensions
Volume: 0.8 litre Size: Ø 8.2 cm x 26.5 cm Weight: 366 grams (Body 320 grams and top 46 grams) Available in 0.5 L / 0.8 L / 1 L.
Our environmental approach (1/2)
We are aware that we need to act to preserve our natural playground, therefore Quechua is committed to reducing the environmental impact of its products. We have chosen an extremely resistant material for this flask (18/8 stainless steel), easy to recycle with recognised durability and food safety. We don't use any inner or outer coatings. The product is also guaranteed 5 in normal use conditions.
Our environmental approach (2/2)
We also selected: - Solvent-free laser etched branding. - Solvent-free paint (powder coating) to give texture to reduce condensation and improve grip. - Maximum reduction in packaging and transport packaging. - Factory manufacture using 100% renewable energy.
PRODUCT DESIGN: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc.) and outdoor sports enthusiasts. A great asset for designing our mountain walking products and providing you with all our expertise.
Don't throw away, repair
Our products will join you on your mountain walks. As you gradually progress, they will age, certain parts can get worn, broken or lost. To help repair your flasks, our tops are available separately. Our environmental approach at Quechua also supports making these parts available to you.
To meet your requirements, Quechua products are tested in the mountains in conditions that you will come across during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers) test products throughout their development until they go to market.
Product plus point
+: Lightweight, ss steel, quick-release top+filter
Wash and dry before storing. Store in a clean, dry place.
This insulating product is tested according to 3 protocols 1/Water at 95°C is placed in the closed product placed in an oven at 20°C The drop in temperature of the water is then measured after 6 hours and reached 74°C 62°C after 12 hours, 48°C after 24 hours2/ Water at 95°C is placed in the closed product placed in an oven at 5°C The liquid reached 60°C after 5 hours 20 minutes3/ Water at 5°C is placed in the closed product placed in an oven at 32°C. The liquid reached 15°C after 16.5 hours.
This insulated flask keeps liquids hot or cold. Significantly lighter than a standard isothermal flask. Locking top with quick opening and integrated filter. / 0.8 litre
Need to keep your drinks hot or cold for several hours? Our designers have developed this light, hard-wearing and insulating stainless flask.